If you are a proud new puppy parent, you may wonder what the first five commands you should teach your puppy are.
Not only will these commands help your pup become obedient, but they will also help create a positive bond between you and your pup.
In this blog post, we will cover the five commands to start teaching your puppy right away: sit, stay, come, heel, and advanced commands.
We will also discuss the importance of positive reinforcement in teaching these commands.
By the end of this post, you will have the tools to start teaching your pup the basics.
TLDR: What Are The First Commands To Teach A Puppy? – The first commands to teach a puppy are typically “sit,” “stay,” “come,” and “heel.”
Table of Contents
The Basics Sit, Stay, Come & Heel
Basic obedience training is essential for any dog but can be especially important for puppies.
Puppies learn best when they understand and can follow simple commands.
This section will outline the basics of sit, stay, come, and heel.
We will also provide tips on how to start training your puppy and how to be consistent in your teaching.
When you first meet your puppy, have them sit for a treat.
This will help them understand that sitting is a desired behavior.
After your puppy has sat for the treat, start teaching them to stay.
This command is a bit more complicated because it requires your pup not to move no matter what distractions are present.
Be sure to praise your puppy whenever they successfully stay put – this will help reinforce the behavior.
Next up is come.
This command teaches your puppy to come to you in response to a whistle or command.
Again, make sure to praise them every time they complete the come command successfully.
Once your puppy knows how to come when called, it’s time to teach him heeling – which is the most difficult of all basic obedience commands.
Heeling means that your pup must be at your side always and should not wander off.
It would be best to start heeling slowly, so your pup understands and accepts this rule early in their training career (and life!).
In addition, there are other basic commands that puppies need to know for them to stay safe and under control while they’re out and about.
These include down (to lay down), leave it (to let someone else have something), and return (to bring something back where it belongs).
You must train these commands consistently to become part of their routine – otherwise, bad habits may develop over time!
Finally, always supervise your puppy while they learn these commands, as accidents can happen even with the best intentions!
Teaching Commands With Positive Reinforcement
It can be challenging to teach your puppy new commands, but you can successfully train them with patience and positive reinforcement.
Start by teaching basic commands such as sit, stay, and down.
Always use positive reinforcement when your puppy obeys the command – this will help them learn the commands quickly and easily.
After your puppy has learned a few basic commands, you can incorporate them into everyday activities.
This will help reinforce the learning process and ensure your pup understands the commands perfectly.
Be sure not to overdo it when training your puppy – if you start correcting them too frequently, they may become discouraged and stop trying to learn.
Have patience and give your pup plenty of time to learn; sometimes, it takes longer than you think to understand what you’re asking of them.
Finally, provide plenty of praise and treats when your pup correctly obeys a command – this will further encourage their obedience.
Advanced Commands For More Advanced Training
Training your puppy is a rewarding experience, but it can be a lot of work if you don’t have the correct commands and techniques.
This blog will discuss the essential commands you need to train your puppy.
We will also provide tips for using positive reinforcement triggers to help the pup learn faster and more efficiently.
Before getting started, it is essential to establish basic commands such as “sit,” “stay,” and “come.”
After teaching these basics, you can introduce more advanced commands like “leave it” or “drop it.”
You can also use these commands when playing with the puppy by having them drop something in their mouth or fetch a toy you are hiding.
As the pup becomes more familiar with your words and actions, you can introduce more advanced tricks such as “rollover” or “play dead.”
One of the most important aspects of training is setting boundaries for acceptable behaviors.
This means establishing rules about what is and isn’t permissible in your home environment.
For example, you might forbid them from eating all the furniture or tearing up all the newspapers in the living room.
You could also set rules about where they are allowed to sleep – on one side of the bed or in another specific spot – and what they are not allowed to do (like jumping on people).
Finally, practice your training regularly, so you and your puppy stay motivated.
Use agility exercises like jumping, weaving, and hopping together for a fun workout that will help improve their coordination and obedience skills!
Building Good Habits And Familiarity With Tricks And Commands
Building good habits is a vital part of any successful endeavor.
Positive reinforcement is essential whether you’re trying to lose weight, quit smoking, or get your puppy to stop chewing your furniture.
You create a positive association between the behavior and the rewards by rewarding good behavior with positive reinforcement (food, treats, etc.).
This will help cement the habit in your puppy’s mind and make it more likely that he or she will repeat the behavior.
Established communication is one of the most important things you must do when training your puppy.
Through verbal commands (sit, come, stay), you can guide your pup in the right direction and ensure that he or she understands what you want him or her to do.
It’s also important to be consistent with your commands, so your pup knows what’s expected of them.
Last, it would be best to familiarize your puppy with some basic tricks to understand how to behave in different situations.
These tricks should include rollover and play dead, which can be life-saving if appropriately used.
You can also train your puppy to respond appropriately when encountering novel objects or people – something that will come in handy when he or she meets new people or animals later in life.
Establishing good habits and familiarizing yourself with Tricks and Commands is essential for a successful career as a dog owner!
By following these simple guidelines, you’ll be on your way to success one step at a time!
Final thoughts: What Are The First Commands To Teach A Puppy?💭
Training your puppy is an essential part of being a responsible pet owner, and teaching them basic commands like “sit,” “stay,” “come,” and “heel” is key.
Using positive reinforcement when training your puppy is also essential, as this will encourage them to learn faster and more efficiently.
Lastly, it is helpful to introduce advanced commands such as “leave it” or “drop it” once you have mastered the basics.
With patience and consistency, you will be well on your way to having a well-trained pup in no time!
FAQs
What are the first 5 commands to teach a puppy?
The first 5 commands to teach a puppy are “sit,” “stay,” “come,” “down,” and “heel.”
Teaching a puppy to sit is essential for basic obedience and can be done by holding a treat above the puppy’s head and moving it back until the puppy sits down, then giving the treat and repeating the command.
To teach a puppy to stay, start by commanding the puppy to sit, then hold up your hand and say “stay” while stepping back a few steps and rewarding the puppy if it stays in place.
The “come” command can be taught by calling the puppy’s name and saying “come” in a happy tone, then rewarding it when it comes to you.
Teaching a puppy to “down” involves commanding it to sit, holding a treat near the floor, and moving it towards you until the puppy lies down, rewarding it, and repeating the command.
Finally, the “heel” command involves walking with your puppy on a leash and stopping when it pulls, then rewarding it when it walks beside you without pulling.
What are the 7 basic dog commands?
The seven basic dog commands are “sit,” “stay,” “come,” “down,” “heel,” “leave it,” and “drop it.”
“Sit” involves commanding the dog to sit and rewarding it for doing so, and “stay” involves commanding the dog to stay in place and rewarding it for doing so.
To teach a dog to “come,” call its name and say “come” in a happy tone, then reward it when it comes to you.
The “down” command involves commanding the dog to lie down and rewarding it for doing so, and the “heel” command involves teaching the dog to walk calmly beside you on a leash without pulling.
“Leave it” is an essential command for preventing the dog from picking up or interacting with dangerous or unwanted items, and can be taught by placing a treat on the ground and saying “leave it” when the dog tries to go for it, then rewarding it when it backs away.
“Drop it” involves teaching the dog to release an item from its mouth when commanded, which can be done by offering a treat and saying “drop it” when the dog drops the item.
What is the first command you should teach a puppy?
The first command you should teach a puppy is “sit.”
This essential basic obedience command can help control the puppy’s behavior and set the foundation for future training.
To teach a puppy to sit, hold a treat above the puppy’s head and move it back until the puppy sits down, then give the treat and repeat the command.
It’s essential to be patient and consistent when teaching this command, rewarding the puppy every time it responds correctly and gradually phasing out treats as it becomes more skilled.
Once the puppy has learned to sit reliably, you can move on to teaching other basic commands like “stay,” “come,” and “down.”
What are the 5 golden rules of dog training?
The 5 golden rules of dog training are consistency, positive reinforcement, patience, timing, and appropriate training techniques.
Consistency means using the same commands and rewards every time, which helps the dog understand what is expected.
Positive reinforcement involves rewarding good behavior with treats, praise, or other rewards rather than punishing bad behavior.
Patience is essential because dogs learn at their own pace and may need time to understand and obey commands.
Timing is crucial because rewards should be given immediately after the desired behavior so the dog associates the behavior with the reward.
Using appropriate training techniques means avoiding harsh or abusive methods and focusing on positive reinforcement and gentle correction.
Following these golden rules can help create a positive and effective training environment for your dog and ensure that your dog learns essential skills and behaviors in a safe and supportive way.
How to teach your dog ‘off.’
Teaching your dog “off” is essential to prevent it from jumping on people or furniture.
One effective way to teach this command is to wait for your dog to jump up, then say “off” in a firm but the gentle tone and immediately turn away.
This teaches the dog that jumping up does not get attention or affection and that it should keep all four paws on the ground.
Another way to teach “off” is to use positive reinforcement.
When your dog is on the ground, treat it and say, “good off.”
If your dog jumps up, turn away and ignore it until it puts all four paws back on the ground, then reward it with a treat and praise.
Consistency is vital when teaching this command, so make sure everyone in the household uses the same command and technique to reinforce the behavior.
Over time, your dog will learn that “off” means to keep all four paws on the ground and will respond to the command more consistently.
How to teach your dog to leave it?
Teaching your dog to “leave it” is essential to prevent it from picking up or interacting with dangerous or unwanted items.
One way to teach this command is to hold a treat in one hand and close your fist around it.
Say “leave it,” and wait for your dog to stop trying to get the treat.
When your dog looks away or backs away, open your hand and give it a different treat as a reward.
Another way to teach “leave it” is to place a treat on the ground and cover it with your hand.
Say “leave it,” and wait for your dog to stop trying to get the treat.
Reward your dog with a different treat when it looks away or backs away.
Repeat this exercise with different items and gradually increase the difficulty by using more tempting items or increasing the distance between your dog and the item.
It’s essential to be patient and consistent when teaching this command and to always reward your dog for obeying.
This command can help keep your dog safe and prevent it from engaging in unwanted behavior.